top of page

Product Information  

CoilSHIELD Bottle Final .png
PureFLOW Bottle Final .png

What Is BioCLEAN?


BioCLEAN is a highly engineered bioremediation cleaner and sanitizer designed specifically for HVAC systems. It uses a two-part process that combines enzymatic breakdown of organic matter with beneficial bacteria that consume contaminants at the source.This eco-friendly solution contains no harsh chemicals and is safe for coils, drain pans, and indoor environments.

How Does BioCLEAN Work?
BioCLEAN is applied while the HVAC system is running, allowing it to be pulled through the coils for deep, consistent coverage. The enzymes dissolve organic buildup, and the bacteria go to work consuming it. This ensures long-lasting remediation and improved airflow—without the need for rinsing.

Application Process 

  • Pretreatment: Apply a properly diluted BioCLEAN solution to begin breaking down organic material.

  • Foam Application: Use a foam sprayer to apply BioCLEAN as a thick foam that penetrates coils and drain pans.

  • System-On Cleaning: Run the system to pull product through—no rinse needed.

  • Ongoing Action: Beneficial bacteria continue cleaning after application.

What Is CoilSHIELD?
CoilSHIELD is a nano-ceramic coating engineered specifically for HVAC coil systems. This advanced formulation creates a protective barrier that safeguards coils from corrosion and environmental contaminants, enhancing system durability and performance

​

It is a one-time treatment that lasts for the life of the equipment.

How Does CoilSHIELD Work?
CoilSHIELD forms a thin, durable ceramic layer over the coil surfaces, effectively sealing them against moisture, pollutants, and corrosive agents. This barrier maintains the coil's structural integrity and thermal efficiency over time.

Application Process:

  • Clean & Sanitize: Begin by thoroughly cleaning the coils with BioCLEAN to remove buildup and prepare the surface for proper adhesion.

  • Surface Preparation: Ensure all debris and oxidation are removed for optimal bonding of CoilSHIELD.

  • Coating Application: Apply CoilSHIELD evenly using a specialized sprayer to fully cover all coil surfaces.

  • Curing: Allow the coating to fully cure according to manufacturer guidelines before system restart.

What Is PureFLOW?
PureFLOW is a specialized anti-oil fouling additive designed to improve refrigerant flow and restore heat transfer efficiency in HVAC systems. By preventing oil buildup on internal surfaces, PureFLOW helps maintain peak performance across the life of the equipment.
It is a one-time treatment that remains effective for the entire service life of the system.

How Does PureFLOW Work?
In HVAC and refrigeration systems, oil can accumulate inside coils and tubing, creating a barrier that reduces heat transfer and system efficiency. PureFLOW chemically modifies the surface tension between oil and metal, preventing the oil from sticking and allowing the refrigerant to flow freely.

Application Process:

  • Qualified Installer Required: PureFLOW should be installed by an experienced HVAC contractor or trained facility personnel.

  • Quick Install: The product is introduced directly into the refrigerant circuit through a service port—fast, simple, and requires no downtime.

  • One-Time Treatment: No reapplication needed; the treatment remains active for the life of the system.

BioCLEAN
Anchor 1
CoilSHIELD Anchor
PureFLOW Anchor

* Specialty Product

OilFLOW Gallon Bottle .png
OilFLOW Quart_.png
1_2 Quart.png

What Is OilFLOW?
Oil FLOW  is a high-performance oil additive developed to boost mileage, reduce friction, and extend the life of engines in refrigerated trucks and transport vehicles. It bonds to metal surfaces to reduce wear, lower operating temperatures, and improve overall engine efficiency.
OilFLOW can deliver up to 10% better fuel economy and begins working immediately—often paying for itself within the first tank of fuel.

 

Additional Resources 

For comprehensive details on each EnerGard product, including Sales Sheets, Safety Data Sheets (SDS), Standard Operating Procedures (SOP), and ordering information, please refer to the links below:

​

BioCLEAN

​​

CoilSHIELD

​

PureFLOW

​

Conversion Chart

EnerGard Conversion Chart.png

Ordering 

Online ordering will be available soon.
For pricing and purchasing, please contact us directly:
📞 704-451-2346
📧 sales@energardhvac.com.

 

Minimum Order Requirements:

  • 🚫 No partial case shipments. All orders must be placed in full case quantities.

  • 📦 Minimum Order: 1 full case (no single bottle sales). 

​

​Payment and Shipping 

  • All orders ship FOB (Freight on Buyer)

  • Terms: 100% payment due at time of order

  • Accepted Payment Methods: Credit Card, ACH

​

​​

bottom of page